Direct measuring of correction planes
Old technologies in entering wheel parameters could provide only rough estimation
of correction planes which inevitably drove to errors in finding imbalance location.
As a result, an operator had to add, change or move weights repeatedly.
Direct measurement provided by Direct3D enables automatic entry of actual wheel data
and ensures precise accuracy regardless of the rim type. Any wheel can be balanced for just
one cycle involving this technology.
Direct measuring is made
automatically by two electronic
gauge arms. For entering
parameters just bring the gauge
arm to a correction plane.
Precise placing of tape weights
When placing the weight by eye at 12 or 6 o'clock position (especially from the internal side
of the wheel), it can shift up to 20 mm causing residual imbalance of 5-6 g per 50 g.
Final stage of Direct3D technology is the placement of tape weights:
- precisely to the estimated distance;
- precisely to the estimated angle;
- operator fixes the weight with the gauge arm clip, pulls the arm out till the beep sound; and sticks the weight to the rim.
